Consulting Hotline0755-2728-6106
Phone number13312911695
Consulting Hotline0755-2728-6106
Phone number13312911695
Your present position：Home > Product > Glue filling machine > Double glue system glue machin
Double glue system glue machinCategory：Double glue system glue machin
Hotline:0755-2728-6106
| Principle of operation：
1, the program editor: in-kind editing, and then Chen can be
2, will have been edited program storage, similar products can be transferred out.
3, irrigation head movement, the pump body (stepper motor drive) for the plastic
4. Movement trajectory: straight line. Curve. Point. Box. Round. W type, S type. Can take any irregular trajectory.
5, Z axis up and down movement with ball shaft screw rapid response.
6, choose the kind of glue, as long as the choice of control card like.
| Application product（in 2M）
1, light bar categories: small modules, soft light, hard light, and so on
2, lighting categories: small modules, wall washer, spot lights, line lights and so on
3, electronic categories: waterproof power, transformers, circuit boards and so on
4, all kinds of non-standard type of irrigation
| Parameters:
A.10:1 to 4:1 glue configuration.
|
1 |
Proportion with glue |
10:1 to 4:1 epoxy resin |
|
2 |
Mixing method |
Dynamic mixing |
|
3 |
Machine travel |
2000*400*100mm |
|
4 |
Programming mode |
Teaching programming |
| 5 |
Application product |
Light bar, lamp, module in 2M |
|
6 |
Dimensions |
(L) 2400*(W)1050*(H)1480mm |
|
7 |
The main pump (A pump) |
9CC/Gear pump(Taiwan Shuohong) |
|
8 |
Attached pump (B pump) |
2.4CC/Gear pump(Taiwan Shuohong) |
|
9 |
Tank Capacity |
A Cylinder 25L，B Cylinder 25L with thermostat |
|
10 |
A plastic flow |
2-15g/s |
|
11 |
A plastic head |
Standard single head，Number of head according to the product |
|
12 |
Input pressure |
0.5-0.7Mpa |
|
13 |
Machine power |
20000W |
|
14 |
Supply voltage |
AC220V±10%,50HZ |
B.4:1 PU glue configuration.
|
1 |
Proportion with glue |
3:1 to 1:1 PU glue |
|
2 |
Mixing method |
Dynamic mixing |
|
3 |
Machine travel |
2000*500*100mm |
|
4 |
Programming mode |
Teaching programming |
| 5 |
Application product |
Light bar, lamp, module in 2m |
|
6 |
Dimensions |
2400*1050*1480mm |
|
7 |
（A pump） |
3.2CC/Gear pump(Taiwan Shuohong) |
|
8 |
（B pump） |
3.2CC/Gear pump(Taiwan Shuohong) |
|
9 |
Tank Capacity |
A Cylinder 25L，B Cylinder 25L with thermostat |
|
10 |
A plastic flow |
2-15g/s |
|
11 |
A plastic head |
Standard single head，Number of head according to the product |
|
12 |
Input pressure |
0.5-0.7Mpa |
|
13 |
Machine power |
2000W |
|
14 |
Supply voltage |
AC220V±10%,50HZ |
| Device Configuration:
|
1 |
Control System |
Xinjie PLC + motion control card +7.2 inch Kunlun on-state touch screen |
|
2 |
Software system |
Zhonghu R&D independently, a domestic counterparts developed a software anti-misuse function, anti-fade automatic shutdown function |
|
3 |
Operate motor |
YAKO Original motor |
|
4 |
Metering pump body |
Precision adjustment wear type |
|
5 |
Cut off the system |
Zhonghu R&D independently |
|
6 |
Mixing device |
Zhonghu R&D independently |
|
7 |
Stirring motor |
OUTAI |
|
8 |
Frame material |
A3*3mm manufacture |
| 9 |
Sliding device |
Taiwan HIWIN |
| 10 |
Mixing tube cleaning |
Zhonghu R&D independently |
| Features:
|
1 |
Friendly and concise interface |
Foolproof operation program design, simple operation, practical,
ordinary workers can learn all operating methods in 5 minutes |
|
2 |
High-end imported electronic control system |
The main electrical part of the wiring, dust, anti-static, have reached foreign standards
Relay Omron. |
|
3 |
Glue detection feedback function |
The drum part is equipped with low level alarm function, timely reminds the glue
|
|
4 |
Glue filter four protection |
Filter protection measures to reduce the mechanical pump body failure probability, to prevent impurities in the glue into the glue pipeline |
| 5 |
Large work surface |
Can be placed at the same time a number of products, the machine automatically continuous operation, with more efficient |
|
6 |
Equipment running more smoothly |
The overall frame with ultra-thick solid material, an effective solution to the machine when the high-speed movement of body shake, improve production stability and accuracy |
|
7 |
High precision mechanical pump body |
Precision adjustment wear type |
| 8 |
Automatic mechanical agitation |
AB glue mixing using dynamic, mechanical mixing, stirring speed 0-3000rpm adjustable
|
| 9 |
High precision operation |
Using HIWIN linear slide and high-precision balance block to ensure the accuracy of operations |
|
10 |
Glue bucket heating |
The use of imported high-quality safety factor reliable silicone film fever, super protection |
| Characteristics of Three-axis Movement:
1, the operation is simple and convenient: touch screen display operation; all Chinese interface, the parameters of the record, display, alarm; for each product to provide the corresponding fixture, the workers training is simple, saving training time and training costs;
2, glue control precision: all key components are imported products, to ensure high speed, precision, while meeting the conditions of automated production under the high reliability requirements.
| Characteristics of glue-mixing part：
1, with plastic, plastic irrigation integration, automatic operation, a machine to achieve two functions.
2, the proportion of setting adjustment, plastic volume adjustable. Ready to use at any time, with high precision, on-demand ratio, saving glue.
3, the operation is simple and convenient, the program is simple to edit, easy to disassemble, directly to the A B two kinds of glue were placed in two corresponding barrels, when filling with plastic, workers only need to press the switch can be.
4, according to the performance of the glue, A bucket with a thermostat device, B plastic bucket sealed to prevent volatile, liquid level sensor device, when the glue below this level automatically alarm, add the corresponding glue
5. Easy to clean, A B plastic mixing part of the mouth only the mixing tube, so the cleaning part of the mixing tube only, the other parts are not cleaned, if the get off work or to stop for some time to only need to press the automatic cleaning button
| Technical characteristics of the machine :
6, the company product positioning clear. And the market of other companies with the same type of strategy is different, I Secretary adhering to the "all for the customer, for all customers, for all customers," the spirit of Seiko fine carving, high quality products, higher positioning market, relying on customer reputation based on the market. Do not seek short-term interests.
Consulting Hotline0755-2728-6106
Phone number13312911695
Scan, focus on us
